1-4-12. Cover Assembly
1. Open the panel (U4) block assembly. (Refer to steps 1 and 2 in Section 1-3-9.)
2. Remove the refl ector assembly. (Refer to Section 1-4-11.)
3. Remove the nine screws.
4. Hold the portion A of the cover assembly, pull it in the direction of the arrow B, and then lower it in
the direction of the arrow C.
5. Remove the cover assembly from the hook of the portion D.
Cover assembly
PSW3 x 8
Portion A
Portion D
B
C
Cover assembly
Hook
Fig. 1-4-12
6. To install, reverse the removal procedure.
1-36 (E)
SRX-R320