Panel (U2) Block Assembly; Panel (U3) - Sony SRX-R320 Service Manual

1-3-3. Panel (U2) Block Assembly

1. Remove the panel (U7) block assembly.
(Refer to Section 1-3-2.)
2. Loosen the two screws (with drop-safe), then remove
the two grilles.
3. Remove the fi ve screws, then raise the panel (U2)
block assembly in the direction of the arrow 1 with
attention to the twelve hooks.
4. Remove the panel (U2) block assembly in the direction
of the arrow 2.
5. To install, reverse the removal procedure.

1-3-4. Panel (U3)

1. Remove the panel (U7) block assembly. (Refer to Section 1-3-2.)
2. Remove the panel (U2) block assembly. (Refer to Section 1-3-3.)
3. Remove the three screws, then remove the panel (U3)
in the direction of the arrow.
4. To install, reverse the removal procedure.
SRX-R320
Hooks
Hooks
Hooks
2
1
Hooks
Panel (U2) block assembly
Fig. 1-3-4
Fig. 1-3-5
Screws
Hooks
Screws
(with
drop-safe)
Grilles
Panel (U3)
Screws
1-5 (E)