Lcd Panel And Led-488 Board - Sony SRX-R320 Service Manual

1-5-7. LCD Panel and LED-488 Board

S/N 100001 to 111678: SRX-R320
1. Open the panel (U4) block assembly. (Refer to steps 1 and 2 in Section 1-3-9.)
2. Remove the screw (PSW4 x 10), then remove the
cover (LCD).
3. Disconnect the harness from the connector (CN5) on
the LED-488 board.
4. Remove the two screws (PS3 x 6), disconnect the two
harnesses from the connectors (CN1 and CN2) on the
LED-488 board, and remove the LED-488 board.
5. Remove the two screws (PS3 x 6), then remove the
LCD panel.
6. To install, reverse the removal procedure.
SRX-R320
Cover (LCD)
PSW
4 x 10
Harnesses
LED-488
board
LCD panel
CN1
CN5
PS3 x 6
CN2
PS3 x 6
Harness
Fig. 1-5-7
1-51 (E)