Panel (U6); Panel (U5) - Sony SRX-R320 Service Manual

1-3-5. Panel (U6)

1. Remove the panel (U7) block assembly. (Refer to Section 1-3-2.)
2. Remove the fi ve screws, then raise the panel (U6) in
the direction of the arrow 1 with attention to the
eleven hooks.
3. Remove the panel (U6) in the direction of the arrow 2.
4. To install, reverse the removal procedure.

1-3-6. Panel (U5)

1. Remove the panel (U7) block assembly. (Refer to Section 1-3-2.)
2. Remove the panel (U6). (Refer to Section 1-3-5.)
3. Remove the three screws, then remove the panel (U5)
in the direction of the arrow.
n
When removing the panel (U5), be sure to remove only
the three screws attached to the center frame (L).
4. To install, reverse the removal procedure.
1-6 (E)
Screws
Hooks
Panel (U6)
Fig. 1-3-6
Panel (U5)
Screws
Fig. 1-3-7
Hooks
Hooks
Hooks
2
1
Hooks
Center frame (L)
SRX-R320