1-4-7. DC Fan (for PS Converter 2)
1. Remove the panel (U7) block assembly. (Refer to Section 1-3-2.)
2. Remove the panel (U6). (Refer to Section 1-3-5.)
3. Disconnect the relay harness.
4. Remove the four screws, then remove the fi nger guard and the DC fan (60 mm).
5. To install, reverse the removal procedure.
n
When attaching the DC fan (60 mm), pay attention to the direction of it.
1-28 (E)
Relay harness
Fig. 1-4-7
Label side
DC fan
PSW
(60 mm)
4 x 45
Finger guard
SRX-R320