Mitsubishi Electric MELDAS 600 Series Instruction Manual page 24

"OK" is displayed if the execution is completed correctly. The error information is displayed if there
is an error when the execution is completed.
If the error occurred on the amplifier unit side, the process will continue in that state if the
cgrrect
axis exists, but the process will be interrupted for errors related to the entire system such as
communication errors. Note that only the MCP process currently being executed will be interrupted;
other MCP processes will not be affected. Error details are explained in section 4 of this manual.
*Caution) Depending on the amplifier type, the compare process may not be accepted. In this
case neither an error nor an "OK" will be displayed, but this is not an error.
@I This displays the overall results and results for each axis executed in each MCP. The overall
results are displayed as follows.
When all axes are correctly downloaded
: "Down load completed"
When one or more axes was not downloaded : "Down load failed"
@ This is the completion message. Press "q" [Enter] to use other tools. The screen will return to the
'M6 MAINTENANCE TOOL MAIN" screen. Press any key besides the above to continue servo and
spindle downloading.
-21-