Serial Number And Nc Typk, Unit Type Set; Preparation; Operating Procedure - Mitsubishi Electric MELDAS 600 Series Instruction Manual

5. Serial Number and NC Type, Unit type Set
This command is used to write the CNC serial No., CNC type, and unit type.
5.1 Preparation
Mount the maintenance tool cassette (HR98x) on C-BUS#2. Refer to the section titled "Mounting the
maintenance tool cassette" for details when mounting the cassette.
5.2 Operating procedure
1) Tool selection
Start the maintenance tool. The M6 Maintenance Tool main screen will appear. Select the "2)
Serial Number and CNC type, Unit type Set" command. (Refer to the section titled "Main Menu" for
details).
2) Tool menu screen
The following menu appears. The operation is the same as that for the conventional serial No.
writing tool "srlmod "-en".
################srlmodtool################
Q : Quit, E : Edit, D : Display
>
.a. Serial No. writing tool version
3) Tool operation
[Q: Quit] This is used to return to the maintenance tool menu screen after the serial No., CNC
type, and unit type writing function is finished.
I
> Q fEnter1
I
I
I
[D: Display] This is used to display the serial No., CNC type, and unit type that are currently set.
Current Serial Number : 123456789