Huawei ETP4830-A1 User Manual page 63

ETP4830-A1 Embedded Power
User Manual
Step 2 Draw the handle outwards to remove the SMU, as shown in
Figure 7-3 Removing an SMU
Step 3 Insert a new SMU into the slot, push the locking latch towards the left, and pull out the
handle.
Step 4 Slide the SMU into the subrack slowly along the guide rail, push in the handle, and then push
the locking latch towards the right.
Step 5 Reset SMU parameters.
Figure 7-4 Installing an SMU
----End
Follow-up Procedure
Pack the removed component and have it sent to the local Huawei warehouse.
Issue 10 (2017-08-08) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Maintenance
Figure 7-3.
55