Huawei ETP4830-A1 User Manual page 46

ETP4830-A1 Embedded Power
User Manual
Main Menu
Step 3 Set the IP addresses and ports for the active and standby servers of the NetEco on the SMU's
LCD.
Table 6-13 NetEco parameters
Main
Menu
Settings
----End
Setting Parameters Before SNMP Management
Before you use SNMP to perform remote management, set the required parameters.
Procedure
Step 1 Apply to the site or equipment room network administrator for a fixed IP address.
Step 2 Set the IP address, subnet mask, and gateway on the LCD, as described in
Table 6-14 IP parameters
Main Menu
Quick Settings
Issue 10 (2017-08-08)
Second-Level
Menu
Gateway
Second- Third-Level
Level Menu
Menu
Comm Para NetEco Main
IP
NetEco Bak IP
NetEco Port
Second-Level
Menu
IP Address
Subnet mask
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Default Value
192.168.0.1
Default Value Settings
58.251.159.136 Set an IP address for the
active NetEco server.
Set an IP address for the
58.251.159.136
standby NetEco server.
31220 Set a port for the NetEco.
Default Value
192.168.0.10
255.255.255.0
6 Commissioning
Settings
Set this parameter
according to the
address assigned by
the network
administrator.
Table 6-14.
Setting
Set this parameter
according to the
address assigned by
the network
administrator.
Set this parameter
according to the
address assigned by
38