Delivery Check And Drive Module Identification; Before Installation; Requirements For The Installation Site - ABB ACSM1 Hardware Manual

Delivery check and drive module identification

Check that there are no signs of damage. Before attempting installation and
operation, check the information on the type designation label of the drive module to
verify that the unit is of the correct type. The label is located on the left-hand side of
the drive module.
Type code + options
The first digit of the serial number refers to the manufacturing plant. The 2nd and 3rd
digit indicate the year of manufacture, while the 4th and 5th digits indicate the week.
Digits 6 to 10 are a running integer starting every week at 00001.

Before installation

Check the installation site according to the requirements below. Refer to
drawings

Requirements for the installation site

See
The ACSM1-04 is to be mounted in an upright position. The wall the drive is to be
mounted on must be as even as possible, of non-flammable material and strong
enough to carry the weight of the drive. The floor/material below the drive must be
non-flammable.
(see page 23)
Ratings
for frame details.
Technical data for the allowed operation conditions of the drive.
Compliance
markings
33
Serial number
Dimension
Mechanical installation