18
Connect the power cables.
Connect the control and the auxiliary control cables.
Check the installation.
Commission the drive.
Commission the braking chopper if required.
Operating of the drive: start, stop, speed control etc.
Inquiries
Address any inquiries about the product to the local ABB representative, quoting the
type code and the serial number of the unit. If the local ABB representative cannot
be contacted, address inquiries to the manufacturing facility.
About this manual
Task
See
Electrical installation: Power cable
(page 49) and
Connecting the control
(page 58)
For optional equipment:
Mains chokes
(page 85)
Mains filters
(page 87)
Resistor braking
(page 91)
Manuals for any optional equipment
Installation checklist
(page 63)
Appropriate Firmware Manual
Resistor braking
(page 91)
Appropriate Firmware Manual
connection:
cables: