Firmware Upgrade; Computer Requirements For Upgrading - Canon imagePRESS C800 Service Manual

Canon
Note:
•
This process is available for the imagePRESS C800/C700 with the
imagePRESS Printer Kit or the imagePRESS Server attached.
•
This process is not to be confused with the process to back up or restore
RAM Data.
I.

Firmware Upgrade

1. Computer Requirements for Upgrading

The
specifications
•
CPU: Celeron 400 MHz or higher (32-bit processor only)
•
Memory: 512 MB of RAM or more
•
Free HDD Capacity: 1 GB or more of available hard disk space.
(Available disk size depends on the firmware in question and the size
of backup data.)
•
Access to e-Support via the internet: Firmware is available for
download from e-Support.
•
CD-ROM Drive with write capability (optional): A CD-ROM drive is
not required since the firmware can be downloaded from e-Support to
a PC. However, a copy of the firmware can be written to a CD for the
Dealer Library.
•
High-Speed USB 2.0 (recommended) or 1.1
•
Display: VGA 640 x 480 resolution or better, 256 colors or more
•
Operating System (any of the following):
o
o
•
Network connection: 10Base-T/100Base-TX, or a PCMCIA slot for an
Ethernet card
•
Download Tool: SST version 4.72 or later
•
Necessary Cables:
o
o
47 Specifications are subject to change without notice.
Canon imagePRESS C800/C700 Service Guide
Revision 2
following are the
47
to download the firmware are:
Microsoft Windows 2000 Server/Professional
Microsoft Windows XP Professional or Home Edition
High-Speed USB 2.0-compliant cable (as short as possible to
avoid connection problems). Note: Do not use extension cables.
Cross-over Ethernet cable: twisted pair cross cable (in the case
of 100Base-Tx, Category 5 or higher)
Canon imagePRESS C800/C700 Service Guide
recommended Desktop PC or laptop
October 2014
Page 54