Canon imagePRESS C800 Service Manual page 122

Canon
Table 73 – SDD Square Fold Booklet-Maker with Two-Knife Trimmer Specifications
Square Fold Booklet Maker & Square Fold Booklet-Maker with Two-Knife Trimmer
Item
Input Accessory
Pass through width
(no Trimming)
Input Width
Output Width
(Booklet Trimming)
Length (Input/output)
Maximum Productivity
Booklet Sheet Capacity
Paper Weight
Trimming Size
Asymmetrical trim
(Offset capability)
Minimal Booklet Staple
Clearance from Top /
Bottom
Maximum Noise Level
Humidity
Temperature Range
Dimensions
(H x W x D)
Weight
Power Requirement
Plug
Maximum Power
Consumption
Canon imagePRESS C800/C700 Service Guide
Revision 2
Square Fold Booklet-Maker with
Two-Knife Trimmer
Booklet Trimmer-D1 (Required)
Approximately
8.27" (210 mm) – 12.60" (320 mm)
Approximately
8.27" (210 mm) –13" (330 mm)
Approximately
7.87" (200 mm) – 12.60" (320 mm)
Approximately
4.71" (120 mm) – 9.60" (244 mm)
Up to 800 booklets/hour
(each booklet up to 21 lb Bond and 100
pages)
Up to 25 sheets (80 g/m
Approximately 16 lb Bond to 110 lb Cover (60 g/m
Each side: Approximately
.08" (2 mm) – 1.38" (35 mm)
Together: Approximately
.16" (4 mm) – 2.76" (70 mm)
Approximately +/- .59" (15 mm)
Approximately1.57" (40 mm)
Approximately 30% to 65% RH
Approximately 63
Approximately 51" x 62.6" x 27.6"
(1,300 mm x 1,592 mm x 700 mm)
Approximately 573 lb (260 kg)
Approximately 740 W
Canon imagePRESS C800/C700 Service Guide
Square Fold Booklet-Maker
3
5.51" (140 mm) –12.6" (320 mm)
4.88" (124 mm) – 9.60" (244 mm)
Up to 1,800 booklets/hour
(each booklet up to 20 lb Bond and 40
2
, 100 pages booklet) (or 5 mm whichever is less)
Up to 70 dB
о о о
F to 90 F (17 C to 32
Approximately 45" x 43.3" x 14.2"
(1,140 mm x 1,100 mm x 360 mm)
Approximately 154 lb (70 kg)
120V AC / 60Hz / 15A
NEMA 5-15
Approximately 230 W
Not Available
Approximately
Same as input
Approximately
pages)
2 2
– 300 g/m )
Not Available
Not Available
Not Available
о
C)
October 2014
Page 116