4
Parts Replacement and Cleaning Procedure > Main Units > Removing the cutter unit
Main Units
Removing the cutter unit
1) Remove the finisher front door. 2) Remove the jam dial (top). Remove 1 screw and remove the jam dial (bottom).
4) Pull out the saddle unit.
F-4-24
F-4-24
4
Parts Replacement and Cleaning Procedure > Main Units > Removing the cutter unit
x1
F-4-22
F-4-22
5) Remove 5 screws and remove the top cover.
3) Remove 3 screws and remove the inner cover.
x3
x5
F-4-25
F-4-25
4-9
F-4-23
F-4-23
4-9