5
Installation > Installation Procedure > Installing the Trimmer Unit
Installing the Trimmer Unit
1
1) Insert the pins at the back of the supplied accride rail to the hole at the back side of the finisher.
Install the accride rail the screw removed in step 11 discussed in "Making Preparations for Installing the Finisher".
(Use the hole at the upside of the accride rail for fixing screw.)
x1
3
3) Draw out the Accride rail (installed in step 1) until it stops.
F-5-15
F-5-15
5
Installation > Installation Procedure > Installing the Trimmer Unit
F-5-13
F-5-13
MEMO:
Hold the trimmer unit frame as shown
below.
F-5-16
F-5-16
2
2) Install the supplied two stepped screws (M4 x 6).
x2
4
4) Hang the trimmer unit frame on the stepped screws installed in step
2.
5-6
F-5-14
F-5-14
F-5-17
F-5-17
5-6