4
Parts Replacement and Cleaning Procedure > Solenoids > Removing the stopper solenoid (SL101)
Removing the stopper solenoid (SL101)
1)Remove the trimmer unit from the finisher.
2)Remove the waste paper box.
4)Remove the registration unit in the direction of the arrow.
4
Parts Replacement and Cleaning Procedure > Solenoids > Removing the stopper solenoid (SL101)
3) Remove 2 far side connectors and remove 2 screws. Remove 3 front side screws and pull out 3 pins.
x2
x2
5) Remove 3 screws and remove the cover.
F-4-44
F-4-44
x3
F-4-45
F-4-45
4-19
x3
F-4-43
F-4-43
4-19