4
Parts Replacement and Cleaning Procedure > Main Units > Removing the cutter unit
6) Remove the cable from 3 locations of the wire saddle and remove 1 connector.
x3
7) Remove 1 connector and secure the cable to the cable guide.
x1
x1
4
Parts Replacement and Cleaning Procedure > Main Units > Removing the cutter unit
8) Remove the cutter unit from the trimmer unit frame.
MEMO:
Hold the cutter unit at the
locations shown below.
F-4-27
F-4-27
F-4-28
F-4-28
x1
F-4-26
F-4-26
4-10
4-10