4
Parts Replacement and Cleaning Procedure > Motors > Removing the registration motor (M102)
Motors
Removing the registration motor (M102)
3) Remove 2 far side connectors and remove 2 screws. Remove 3 front side screws and pull out 3 pins.
1) Remove the trimmer unit from
the finisher.
2) Remove the waste paper box.
4)Remove the registration unit in the direction of the arrow.
4
Parts Replacement and Cleaning Procedure > Motors > Removing the registration motor (M102)
x2
x2
5)Remove 2 screws and 1 connector, and remove the registration motor.
F-4-48
F-4-48
x2
x1
F-4-49
F-4-49
4-20
x3
F-4-47
F-4-47
4-20