Canon Inner Booklet Trimmer-A1 Service Manual page 29

4
Parts Replacement and Cleaning Procedure > Removing this Equipment
5) Remove 3 screws and remove the inner cover.
x3
8) Remove 1 screw and remove the steel plate. Remove 1 bearing and 2 resin rings. Remove the steel plate and remove the drive belt.
Note:
Be careful not to lose the
parallel pin on the inside of
the left side pulley.
4
Parts Replacement and Cleaning Procedure > Removing this Equipment
6) Pull out the saddle unit.
F-4-6 F-4-6
x1
7) Remove 5 screws and remove the top cover.
F-4-7 F-4-7
x5
F-4-8 F-4-8
F-4-9 F-4-9
4-3
4-3