ABB 650 series Engineering Manual page 89

1MRK 511 261-UEN -
650 series
Engineering Manual
1. Right-click the apparatus symbol and select Select Input Signal. A list of
engineered switch control application function blocks opens, see
2. Select the switch control application function block that corresponds to the
selected apparatus.
3. Right-click the measurement symbol and select Select Input Signal. A list of
the engineered measurement application function blocks opens.
4. Select the measurement application function block that corresponds to the
selected symbol.
IEC08000125 V1 EN
Figure 58: GDE: Input signal selection
The number of order in the selection window of the process objects corresponds to
the number given in the PST tree and to the application function block in ACT.
Only those apparatus and measurements are shown that are configured in the
application configuration program.
Local HMI engineering
IEC08000125.vsd
Section 6
Figure 58.
83