Mitsubishi Electric FR-A820-00046 Instruction Manual page 152

Operation panel (FR-DU08)
For the details of operation modes, refer to page 5-263.
Monitored items can be changed. (Refer to page 5-327.)
For the details of the trace function, refer to page 5-591.
For the details of faults history, refer to page 6-9.
The USB memory mode will appear if a USB memory device is connected. (Refer to page 2-58.)
Parameter setting mode
In the parameter setting mode, inverter functions (parameters) are set.
The following table explains the indications in the parameter setting mode.
Operation panel
indication
Tab. 4-2:
4 - 4
Function name
Parameter setting mode
Parameter clear
Parameter all clear
Faults history clear
Parameter copy
Initial value change list
IPM initialization
Automatic parameter
setting
Group parameter setting
Indications in the parameter setting mode
Description
Under this mode, the set value of the displayed parameter
number is read or changed.
Clears and resets parameter settings to the initial values.
Calibration parameters and offline auto tuning parameters
are not cleared.
The communication parameters are not cleared.
For the details of the uncleared parameters, refer to page A-5.
Clears and resets parameter settings to the initial values.
Calibration parameters and the offline auto tuning
parameters are also cleared.
The communication parameters are not cleared.
For the details of the uncleared parameters, refer to page A-5.
Deletes the faults history.
Copies the parameter settings saved in the inverter to the
operation panel. The parameters copied to the operation
panel can be also copied to other inverters.
Identifies the parameters that have been changed from their
initial settings.
Changes the parameters to the settings required to drive an
IPM motor (MM-CF) as a batch.
Also changes the parameters back to the settings required to
drive an induction motor.
Changes parameter settings as a batch. The target
parameters include communication parameters for the
Mitsubishi's human machine interface (GOT) connection and
the parameters for the rated frequency settings of 50 Hz/
60 Hz.
Displays parameter numbers by function groups.
Basic operation
Refer
to
page
4-6
5-700
5-700
6-3
5-701
5-708
5-70
5-211
5-34