Lenovo ThinkStation P720 Hardware Maintenance Manual page 215

b. Flex both sides of the retainer downward to release the microprocessor from the retainer
the microprocessor off the retainer
Notes:
• Your microprocessor might look different from the one illustrated.
• Touch only the edges of the microprocessor. Do not touch the gold contacts.
Figure 196. Removing the microprocessor from the bracket
c. Carefully wipe the thermal grease off the old microprocessor. Place the old microprocessor on a
static-protective surface.
6. To install a new microprocessor, do the following:
a. Remove the microprocessor socket cover if it is installed.
Figure 197. Removing the microprocessor socket cover
b. Touch the static-protective package that contains the new microprocessor to any unpainted surface
on the outside of the computer. Then, remove the new microprocessor from the package.
2
.
Chapter 9
.
Hardware removal and installation
1 . Then, lift
209