b. Flex both sides of the bracket to remove the storage drive from the bracket.
Figure 62. Removing the storage drive from the type
4. To install a 3.5-inch storage drive in a type
a. Open the handles on both sides of the storage drive bracket, and pull out the empty bracket.
b. Flex both sides of the bracket and align pins
new storage drive.
Notes:
• Ensure that the circuit board
bracket.
• Do not touch the circuit board
Figure 63. Installing the storage drive into the type
130
P720 Hardware Maintenance Manual
1
bracket
1
bracket, do the following:
1
on the bracket with the corresponding holes in the
2
faces upward and the connectors
2
on the storage drive.
1
bracket
3
face toward the front of the