a. Release two retaining clips
two retaining clips
and-fan assembly. Set the heat-sink-and-fan assembly aside.
Notes:
• Ensure that the thermal grease on the bottom of the heat-sink-and-fan assembly does not get in
contact with anything.
• Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must
be kept as clean as possible.
• The following illustration uses heat-sink-and-fan assembly 1 as an example. If you are removing
the microprocessor retainer from heat-sink-and-fan-assembly 2, follow the same procedure.
Figure 195. Opening the clips on the microprocessor bracket
208
P720 Hardware Maintenance Manual
1
at the corner of the microprocessor retainer and then release the other
2
as shown. Then, lift the retainer
3
with the microprocessor from the heat-sink-