M.2 solid-state drive in an M.2 solid-state drive PCIe adapter
Install M.2 solid-state drives in the alphabetic order as shown.
Figure 107. M.2 solid-state drive installation order
To remove or install an M.2 solid-state drive in the M.2 solid-state drive PCIe adapter, do the following:
1. Remove the M.2 solid-state drive PCIe adapter from the PCIe card slot. See "Full-length PCIe card" on
page 164.
2. Slide the cover latches to the open position. Then, pivot the cover as shown until it stops.
Figure 108. Opening the cover
152
P720 Hardware Maintenance Manual