5. Slide the storage drive bracket with the converter into the storage drive bay.
Figure 87. Installing the type
6. Connect the signal cable and the power cable to the converter, and then close the handles on both sides
of the storage drive bracket.
To remove or install a 2.5-inch storage drive with a converter in a type
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 103.
2. Locate the storage drive bay. See "Internal storage drives" on page 40.
3. Press the pit on the bracket cover, and then grasp the tilted cover to pull the bracket out of the storage
drive bay.
Figure 88. Removing the type
142
P720 Hardware Maintenance Manual
1
storage drive bracket
2
storage drive bracket
2
bracket, do the following: