Hitachi TM3030 Plus Instruction Manual page 148

NOTE : The range over which the field of view can be moved by image shifting is limited. If
it ceases to move, press the Reset button once. Use the Image Shift again for fine
adjustments, while manipulating the XY knobs.
2. Searching for Field of View (Motor Drive Stage)
The field of view can be moved by mouse operation on the observation screen.
2a. Stage Move Button
If you want to move a field of view extensively, use the stage move button.
If the stage move button is not found on the observation screen, select [8 Points] or [4
Points] from the [Mouse Control Mode] in the [Stage] menu. For the details, refer to
4.3.7.2 Mouse Control Mode.
When matching the mouse cursor to the △ marks (the stage buttons) displayed on
the observation screen, the cursor changes into the
condition, if the left mouse button is clicked, the mouse cursor stays on the △ mark,
and the field of view does step movement toward the mark. Also, while the left mouse
button is held down, the mouse cursor stays on the △ mark, and the field of view
sequentially moves toward the mark,
Stage move button
(8 points)
Figure 4.2.7-6 Searching for FOV (Stage Move Button Operation)
Figure 4.2.7-7 Mouse Control Mode Menu
4 - 29
mark. Under such a