Figure 310: Removing a 2.5-inch HDD
Installing
1. Unlock the HDD module as described above.
2. Insert the HDD module into a drive bay and carefully push back as far as it will go (1).
3. Close the locking lever to lock the hard disk drive in place (2).
4. If the status of the HDD remains "unknown" after rebuild has finished, contact Fujitsu
Customer Support (see
Figure 311: Removing a 2.5-inch HDD
ETERNUS CS800
"Support and Help" on page
16.1 ETERNUS CS800 S6 Hardware
12).
446