Fujitsu ETERNUS CS800 S6 User Manual page 141

Figure 105: VTL Wizard: About
Step 2: Add Partition
1. Under Partition Settings, enter information about the partition (see
Partition" on page
Name
Library Model
Number of Storage Slots
Virtual Tape Drive Model
ETERNUS CS800
142).
Enter the name of the VTL partition.
Select the library model emulated by the partition.
The library model determines the inquiry string
returned to the host by the ETERNUS CS800.
The following library models are available:
Fujitsu CS-TL
l
ADIC Scalar 100, ADIC Scalar i2000, or ADIC Scalar
l
i500
ADIC Pathlight VX
l
Accept the default number of storage slots(based on
model), or enter the number of storage slots in the
partition (up to 9,000).
One I/E slot is created for each storage slot up to a
maximum of 240 I/E slots.
Select the tape drive model emulated by the virtual
drives in the partition. All virtual tape drives in a
partition must be the same model.
The following tape drive models are available:
IBM LTO-1, LTO-2, LTO-3, LTO-4, or LTO-5
l
HP LTO-1, LTO-2, LTO-3, LTO-4, or LTO-5
l
8.3 VTL Wizard
"VTL Wizard: Add
141