Fujitsu ETERNUS CS800 S6 User Manual page 109

Primary, Secondary, and Tertiary
DNS IP Address
The DNS Suffix Search List and DNS IP Addresses cannot be modified if the
ETERNUS CS800 is currently joined to a Windows domain. To disjoin a Windows
domain, see
Configuring Bonding Details
Under IP Address Configuration > Bonding Details, configure bonded devices (see
"Network Page: Bonding Details" on page
Figure 82: Network Page: Bonding Details
1. If necessary, click the Show link to show the bonding details table.
2. For each available bonded device (bond0, bond1, and so on), select two or more
Ethernet ports with the same link speed to assign to the bond. Or select Not Bonded
to leave a port unassigned to any bond.
If no ports are assigned to a bond, the bond cannot be configured. That is, settings
cannot be entered for the bond in the Interface Details or IP Address tables because
no Ethernet ports are assigned to the device.
All ports assigned to the same device are bonded together into a single logical port.
For example, if you select bond0 for port eth1 and port eth2, both ports are bonded
together in the bond0 device. A bonded device can contain two or more ports.
All ports associated with a bond must have the same link speed (1GbE or 10GbE).
3. For each bonded device, specify the bonding mode:
ETERNUS CS800
(Optional) The IP addresses of up to three DNS servers
used to resolve domain names and translate them into
IP addresses.
"Disjoining a Workgroup or Domain" on page 197
6.3 Running the Getting Started Wizard
You must specify a DNS IP address if you plan
to use hostname format when configuring an
NTP time server, outgoing e-mail server,
replication sources and targets, and other
information.
109):
109