Fujitsu ETERNUS CS800 S6 User Manual page 315

d. Click OK.
The key is removed in the Available SSH Public Keys table.
3. In addition to configuring SSH authentication, the CLI Administrator and view
accounts may also be configured with password authentication.
Select the Allow login with password check box to enable a password on a CLI
l
Administrator or CLI Viewer account.
Clear the Allow login with password check box to disable a password on a CLI
l
Administrator or CLI Viewer account
Enter the following information:
New Password
Confirm New Password
Additional Information
Passwords can be up to 32 characters. Alphanumeric characters and special
l
characters are allowed.
For accounts enabled with both SSH and password authentication, the ETERNUS
l
CS800 system will first attempt SSH authentication . If there are no keys defined or
no client key matches, the ETERNUS CS800 system will fall back to password
authentication.
4. Click Apply.
Enabling GUI Service Account
Use the GUI password when logging onto the remote management console as a service
account(see
To enable or disable the GUI service account:
1. Under GUI Service do one of the following steps:
Select the Enable GUI Service Login check box to enable the GUI service account.
l
Clear the Enable GUI Service Login check box to disable the GUI service account.
l
2. Enter the following information:
New Password
Confirm New Password
Additional Information
Passwords can be up to 32 characters. Alphanumeric characters and special
l
ETERNUS CS800
"Accessing Remote Management" on page
Enter the new password.
Enter the new password again to confirm it.
122).
Enter the new password.
Enter the new password again to confirm it.
10.9 System
315