Important Information; Safety Instructions; Before Starting Up - Fujitsu ETERNUS CS800 S6 User Manual

1.2

Important Information

In this chapter you find essential information regarding safety when working on the
hardware of your system.
1.2.1

Safety Instructions

For safety instructions see also the manual Safety Notes and Regulations.
This system meets the relevant safety regulations for IT equipment. If you have any
questions about whether you can install the ETERNUS CS800 system in the intended
environment, please contact your sales outlet or our customer service team.
CAUTION!
The actions described in this manual shall be performed by technical specialists.
l
A technical specialist is a person who is trained to install the system including
hardware and software.
Some components of the ETERNUS CS800 system may be replaced by the
l
customer if they fail. These components are called Customer Replaceable Units
(CRUs). Other units may not be replaced by the customer. Please note that
unauthorized interference with the system will void the warranty and exempt the
manufacturer from all liability.
Any failure to observe the guidelines in this manual, and any improper repairs
l
could expose the user to risks (electric shock, energy hazards, fire hazards) or
damage the equipment.
1.2.2

Before Starting Up

CAUTION!
During installation and before operating the device, observe the instructions
l
on environmental conditions for your device.
If the system has been moved from a cold environment, condensation may
l
form both inside and on the outside of the machine.
Wait until the system has acclimatized to room temperature and is
l
absolutely dry before starting it up. Material damage may be caused to the
system if this requirement is not met.
ETERNUS CS800
1.2 Important Information
14