Clinical Use - Philips IntelliVue TRx Instructions For Use Manual

Clinical Use

Information
Sound 1
Sound 2
Sound 3
Draft - 1 Aug 08
Auditory
Signal Sound
beep
low-pitch tone
alternating
pitch repeated
tone
How Used
• Indicates successful Self-Test at power
on.
• Indicates successful SpO
measurement when measurement is
initiated at the transceiver.
• If the Check button is pressed,
confirms that the transceiver is in
contact with the Information Center
(e.g., when transceiver is brought back
into range).
Indicates pulse detected during Spot Check
SpO measurement.
2
Note— The pulse tone can be muted from the
Information Center. See "Patient
Configurable Settings in Telemetry Setup" on
page 9-6.
Continuous tone to help you locate a missing
transceiver. Initiated by clicking Find
Device in the Telemetry Setup window.
Tone continues until Check button is pressed,
batteries are removed, or batteries completely
discharge.
Transceiver Controls
Audible Tones
Spot Check
2
3-11