Pairing with
To connect the transceiver to the monitor, perform the following steps:
a Direct
Connection
to the MP5/
MP5T
Pairing with
When the transceiver and monitor (MP5/MP5T, MP2 or X2 only) are both
a Short-
equipped with short-range radio capability, the transceiver can be paired with
Range
the bedside monitor at the monitor. Monitors which have this capability have a
Radio
short range radio symbol
Connection
If your transceiver is not already equipped with the SRRA, follow the
instructions and figures below to install the adapter.
Draft - 1 Aug 08
Step
Action
1
Remove the protective cover from the transceiver's monitor/service
port.
2
Insert the interface cable into the monitor/service port.
3
Attach the interface cable to the monitor using the port labeled with
the
icon.
Pairing Non-networked Devices
on the model label.
Pairing Monitoring Devices
10-17