Starting Up And Shutting Down The System - Canon CXDI-50C Service Manual

5.2 Starting up and shutting down the System

Perform the following sequences when starting up and shutting down the system.
5.2.1 Sequence for Starting up the System
Perform the following sequence when turning the system power on.
If you do not perform the correct sequence, the imaging unit cannot be recognized, resulting in
an error. (This is because the system communicates with the imaging unit when turning the
system on.)
The power box cannot be turned on in conjunction with turning on the control PC.
Since the power box is equipped with a remote switch that turns on/off the secondary output,
you can install the switch on your side to turn it on/off.
1) Turn on the main power of the power box.
2) Turn on the remote switch of the power box.
3) Turn on the control PC.
Note:
Ccrstart.bat should be registered in Windows Startup.
5.2.2 Sequence for Turning the Power off (Shutdown)
From OPU, select SYSTEM → [SHUTDOWN] or [SHUTDOWN after transfer]
1)
The control PC automatically turns off.
2) Turn off the remote switch of the power box.
3) Turn off the main power of the power box.
Note:
Turn off the main power of the power box and OPU power when not using the system for
a long period.
2. Installation Manual
- 16 -