Removing The Side Cover - Canon CXDI-50C Service Manual

Removing the side cover

2.2
Side cover (R)
Side cover (C)
Shock sensor (pigment)
Screw (x2)*
1. Loosen the screw (x2x2) fix the side cover (L) and (R). And remove the cover carefully
because the cover is pushed into the ditch so as not to come out.
2. Lift the side cover (C) with a little and remove it.
3. Applied the solvent, loosen the screw (x2) and remove the plate.
Exchange the shock sensor when its color is red.
Note:
1. Handle with carefully so that the defect should not adhere.
4. Repair Guide
5
Sleeve cover
Side cover (L)
Screw (x2x2)
Shock sensor
(Color former)
Plate