X-Ray Board; Remote Switch - Canon CXDI-50C Service Manual

P o w e r B o x
P o w e r B o x
2
2
PWB-40XRAY
The Power Box consists of the following parts; PWB-40XRAY board (X-ray I/F), Power supply,
Remote power switch. And it has the function that is the signal transition with Imaging Unit,
Power supplying, the signal transition with the X-ray generator. The Power Box can be
connected only one Imaging Unit.
PWB-40 X-ray board
2.1
The PWB-40 X-ray board has the following function.
(1) The Interface with the X-ray generator.
(2) Relaying the signals insulating the Internet transition. (AC230V Basic Insulation)
(3) The cable length setting (3/7m) in the 50 Power supply capacity.
(4) The firm initializing code on the Imaging Unit boot switch is installed.
(5)

Remote switch

2.2
(1) Output control of the 2
3. Function
nd
side on the 50 Power supply (7m) or 50 Power supply (3m)
7