Removing The Pwb-50Di - Canon CXDI-50C Service Manual

4. Repair Guide

Removing the PWB-50Di

2.6
Screw x 9
Connect point (Below)
Connect point (Upper)
Hold
1. Remove the flat cable.
2. Loosen the screw (M2.6 x 9) fixes the PWB-50Di and remove it.
Note:
1. At assembling, insert the connector carefully in the direction of the flat cable.
2. At assembling, there must not be a foreign body on the spacer sheet.
3. Exchange the flat cable for parts with a new one used one.
21