Throttle Body Components; Throttle Body On-Vehicle Inspection; Throttle Body Removal And Installation - Suzuki Liana RH418 Supplementary Service Manual

Throttle Body Components

1. Throttle body 4. Gasket
2. Gasket 5. Idle air control valve
3. TP sensor 6. IAC valve screws

Throttle Body On-Vehicle Inspection

Check that throttle valve lever (1) moves smoothly.

Throttle Body Removal and Installation

S3RH0B1406004
Removal
1) Disconnect negative cable at battery.
2) Drain cooling system referring to "Cooling System
3) Disconnect accelerator cable (1) from throttle valve
4) Disconnect IAT sensor connector and remove air
I3RH0B140013-01
7. TP sensor screws
: Tightening torque
: Do not reuse.
S3RH0B1406005
5) Disconnect electric connector from TP sensor (1)
I2RH0B140019-01
6) Remove throttle body from intake manifold.
7) Disconnect engine coolant hoses from throttle body.
Engine Mechanical:
Flush and Refill in Section 1F in related manual".
lever.
cleaner assembly with air cleaner outlet hose.
and IAC valve (2).
1D-11
S3RH0B1406006
I2RH0B140019-01
I2RH0B140020-01