Suzuki Liana RH418 Supplementary Service Manual page 341

5) Stake new counter shaft driven gear lock nut (2),
using standard punch in combination with hammer.
NOTE
When staking counter shaft driven gear lock
nut (2), point a suitable staking tool (1)
toward differential drive pinion shaft (3) axis
center and stake lock nut securely, as shown
in the figure. (Poor staking may cause
abnormal noise.)
[A]: Correct [B]: Wrong
I3RH0B510034-01
[C]: Wrong
Automatic Transmission/Transaxle:
6) Apply A/T fluid to counter shaft LH thrust roller
bearing (1) and race.
Counter shaft LH thrust roller bearing dimension
Outside diameter: 66.0 mm (2.60 in.)
Inside diameter: 50.0 mm (1.97 in.)
Thickness: 2.7 mm (0.11 in.)
7) Place counter shaft LH thrust roller bearing (1) and
race to transaxle case.
8) Apply A/T fluid to counter shaft RH roller bearing
race.
9) Install counter shaft RH roller bearing race to
transaxle housing.
5A-115
I2RH01510213-01