Samsung OfficeServ 7200 Installation Manual page 86

CHAPTER 8. Starting the System
4.1.2 Station Camp-On
If a caller dials a number and the recipient is busy, this function automatically
connects the recipient and the caller right after the recipient hangs up the call.
Follow the procedure below and check the Station Camp-On function:
1) Lift the handset of the test phone and dial a busy station.
Verify the busy tone.
2) Upon verifying the busy tone, press the hook flash button.
Check if the busy tone stops.
3) Press the reservation code.
Verify a confirmation tone.
4) Replace the handsets of the test phone and the busy station.
Check if the test phone rings.
5) Lift the handset of the test phone.
Check if the ring stops and confirm the ring-back tone.
Check if the other phone rings.
6) Lift the handset of the other phone.
Check if the other phone stops to ring, if the ring-back tone of the test phone
stops, and if the parties are normally connected.
Page 8-6
OfficeServ 7200 Installation Manual/Ed.00
© SAMSUNG Electronics Co., Ltd.