Figure 2.8 Wall Installation (2); Figure 2.9 Wall Installation (3); Figure 2.10 Wall Installation (4) - Samsung OfficeServ 7200 Installation Manual

CHAPTER 2. Installing Chassis
2) Use the electrical drill to make holes where the screw holes were marked.
The depth of the hole should be over 35 mm and the diameter should be about
5.5 mm so that the plastic anchor can be easily inserted.
3) Using a hammer, insert the plastic anchor into the hole.
4) Once the wall bracket is fixed to the wall, put a cross screw into the plastic
anchor and tighten the screw with the screwdriver.
Page 2-6

Figure 2.8 Wall Installation (2)

Figure 2.9 Wall Installation (3)

Figure 2.10 Wall Installation (4)

OfficeServ 7200 Installation guide/Ed.00
© SAMSUNG Electronics Co., Ltd.