Introduction; Audience; Document Content And Organization - Samsung OfficeServ 7200 Installation Manual

INTRODUCTION

Purpose
This document provides information(installing Chassis, mounting and replacing
Modules, connecting external batteries, power, C.O. lines, stations and additional
equipment, starting the system) required for installing the Samsung OfficeServ
7200 system.

Audience

This document is intended for personnel who install the Samsung OfficeServ 7200
system.

Document Content and Organization

This document consists of eight chapters as follows:
CHAPTER 1. Pre-Installation Information
Describes items to check when inspecting the installation site and the grounding
and power conditions before installing the OfficeServ 7200 system.
This chapter also describes the items included in the OfficeServ 7200 package and
the installation procedure.
CHAPTER 2. Installing Chassis
Describes how to install an OfficeServ 7200 Chassis on the ground, inside rack or
on a wall, depending on the installation environment, and how to connect the
grounding wire.
CHAPTER 3. Mounting and Replacing Modules
Describes how to mount and replace various Modules of the OfficeServ 7200
system.
© SAMSUNG Electronics Co., Ltd. Page I