Samsung OfficeServ 7200 Installation Manual page 76

CHAPTER 7. Connecting Stations and Additional Equipment
Detail procedures for each of the steps above are as follows:
Setting Network Parameters through MMC 830
Set the network parameters of the system. Contact the network manager when
setting values for the network parameters.
1) Set the IP address of the system.
2) Set the subnet.
3) Set the gateway address.
4) Reset the Module.
Setting Remote OfficeServ Manager Parameters
1) Execute OfficeServ Manager
2) Click [Link] [CommSetup] menu on the OSM main screen.
Page 7-16
Module Reset
The Module should be rest to apply new settings to the system.
Figure 7.19 OSM Screen
OfficeServ 7200 Installation Manual/Ed.00
© SAMSUNG Electronics Co., Ltd.