Connecting External Batteries; Cautions When Connecting External Batteries - Samsung OfficeServ 7200 Installation Manual

CHAPTER 4

Connecting External Batteries

This chapter describes how to connect external batteries to the OfficeServ 7200
system.
1

Cautions when Connecting External Batteries

External batteries are required to ensure stable operation of the OfficeServ 7200 system
in case a power failure occurs. Rated capacity of an external battery is DC 48 V and
45 AH per Chassis. Batteries should be connected to each Chassis to guarantee safety
and a fuse(125 VAC, 5 Amp) should be positioned between the output terminal of the
battery and the Chassis.
Cautions to be taken when connecting an external battery are as follows:
Do not connect an external AC power until the battery and the system is
completely disconnected.
Check the polarities(+, -) when connecting external batteries.
© SAMSUNG Electronics Co., Ltd. Page 4-1