Sr-Iov Functions Which Lpar Manager Supports - Hitachi Compute Blade 500 Series User Manual

4 Only supported the Onboard-LAN (LOM) or the mezzanine card.
.
5 Only supported a power control by way of WOL by SC/BSM and SC/DPM.
.
6 For supported status, see SR-IOV functions which LPAR manager supports.
.
7 For support status, see the Hitachi Compute Systems Manager Software User Guide.
.
8 CB 520X B1/B2 does not support this item.
.
9 VF NIC view and settings are not supported.
.
10 VF NIC does not support this item.
.
11 You cannot perform Migration between different versions. (both of shut-down mode
.
and concurrent maintenance mode)
12 N+M cold standby is supported only between same server blade models.
.
13 Unsupported when Emulex 10Gb 4 port Onboard LAN is enabled on CB 520X B1/B2.
.
14 Supported status differs depending on Oracle Database version.
.
Visit the following URL.
<Linux>
http://www.oracle.com/technetwork/database/enterprise-edition/tech-
generic-linux-new-086754.html
<Windows>
http://www.oracle.com/technetwork/jp/database/clustering/tech-generic-
windows-new-166584.html
15 Only CB 520X B1/B2 supports this item.
.
16 LPAR migration in concurrent maintenance mode is not supported in configurations
.
using 16Gb FC adapters.

SR-IOV functions which LPAR manager supports

SR-IOV functions supported by LPAR manager are shown in the table below.
Prerequisite
configuration
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Item
Table A-5 SR-IOV functions which LPAR manager supports
Item
Switch module
1, 2, 3
NIC
4, 5, 6, 7
OS
Setting Item Catalogue
Support (version)
Support (version)
Connection only to10Gb
switch module is
supported.
(01-9X or later)
Emulex 10Gb NIC
(01-9X or later)
Red Hat Enterprise Linux
6.4
Red Hat Enterprise Linux
6.5
(01-9X or later)
Red Hat Enterprise Linux
6.6
A-13