Hitachi Compute Blade 500 Series User Manual page 346

Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
9-12
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Go to VNIC Assign on Type=N & Schd=S.
The device is a shared NIC, so you need to change it on the PCI
Device Assignment screen.
Aborts the specified process.
Make the setting on the VNIC Assignment screen.
Guest operating system may not remove USB device(s)
safely. Force to detach.
Indicates that connecting or disconnecting the device has failed.
If activating the LPAR, stops activation. If changing the device
target, stops connecting or disconnecting the device.
Assign the USB device to the LPAR again.
LP cannot activate LPAR due to safe mode.
The LPAR cannot be activated because the safe mode is on.
Aborts the specified process.
Release the safe mode and then perform the operation again.
LP cannot save configuration due to safe mode.
The configuration information cannot be saved because the safe
mode is on.
Aborts the specified process.
Release the safe mode and then perform the operation again.
LP could not import Time Setting of SVP.
Import of time from the management module failed.
Aborts the specified process.
Check if the version of management module consist with a
cooperation NTP version.
LP is busy with another LPAR(X) activation process.
During LPAR Activation processing, activation failed except for the
securing of resources.
Aborts the specified process.
Wait a moment and then retry the specified process.
Messages