Hitachi Compute Blade 500 Series User Manual page 280

The following table describes each item on this screen.
No.
(1)
(2)
(3)
(4)
7-76
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Figure 7-33 NTP Server Configuration Screen
Table 7-29 Details of the NTP Server Configuration Screen
Item
Select Select displaying time.
Display
LPAR RTC: Displays the current RTC time of
the LPAR.
LPAR SEL Time: Displays the logical SEL
time of the LPAR.
Last Activated: Displays the RTC time when
the LPAR is activated last.
Last Deactivated: Displays the RTC time
when the LPAR is deactivated last.
RTC Last Modified: Displays the RTC time
of the LPAR updated last by the guest.
# Displays the LPAR numbers.
Name Displays the LPAR name.
Sta Displays the LPAR status.
Act (Activate): The LPAR is powered on.
Dea (Deactivate): The LPAR is powered off.
Fai (Failure): The LPAR cannot be used due
to an unrecoverable failure. Reboot LPAR
manager when this happens. If rebooting
LPAR manager cannot solve the problem,
Operation by LPAR manager Screen
Description
Supported
Default LPAR
Value manager
Version
LPAR RTC 01-0X~
- 01-0X~
NO_NAME 01-0X~
Dea 01-0X~