Hitachi Compute Blade 500 Series User Manual page 383
Logical partitioning manager
Hide thumbs
Also See for Compute Blade 500 Series:
- User manual (506 pages) ,
- Management module setup manual (362 pages) ,
- Web console users manual (240 pages)
Table of Contents
Advertisement
ID
Level
[Action] None.
0xFC76
Information
[Description] LPAR migration process has been completed properly on the migration
source. <X> is the IP address on the migration source LP; <Y> is the IP address on the
migration destination LP.
[Action] None.
0xFC77
Information
[Description] LPAR migration process has been completed properly on the migration
destination. <X> is the IP address on the migration source LP; <Y> is the IP address on
the migration destination LP.
[Action] None.
0xFCA3
Warning
[Description] LPAR migration failed on the source LP. <X> is the IP address on the
migration source LP; <Y> is the IP address on the migration destination LP; <Z> is the
error reason code.
[Action] Take actions following HCSM messages shown during LPAR migration task in
operation.
0xFCA4
Warning
[Description] LPAR migration failed on the destination LP. <X> is the IP address on the
migration source LP; <Y> is the IP address on the migration destination LP; <Z> is the
error reason code.
[Action] Take actions following HCSM messages shown during LPAR migration task in
operation.
0xFC78
Information
[Description] LPAR <X> information is updated. <X> is the LPAR number.
[Action] None.
0xFC79
Information
[Description] LPAR <X> is added. <X> is the LPAR number.
[Action] None.
0xFC7A
Information
[Description] LPAR <X> is removed. <X> is the LPAR number.
[Action] None.
0xFC03
Information
[Description] LP configuration format has been changed. <X> is the configuration format
version before change; <Y> is the configuration format version after change.
[Action] None.
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Description and Action
Migration process completed on the source LP.
(SIP=<X>,DIP=<Y>)
Migration process completed on the destination LP.
(SIP=<X>,DIP=<Y>)
Migration failed on the source LP.
(SIP=<X>,DIP=<Y>,RC=<Z>)
Migration failed on the destination LP.
(SIP=<X>,DIP=<Y>,RC=<Z>)
LPAR <X>, Sent information update alert.
LPAR <X>, Sent information update alert (add).
LPAR <X>, Sent information update alert (remove).
LP configuration format has been changed. (Previous
Ver.=<X>,New Ver.=<Y>)
Messages
Message
9-49
Advertisement
Table of Contents
