•
Use same time zone in management modules, BMC, and LPAR manager.
If not, you can't know the exact time when a failure occurs, because each
time shows different.
•
Set synchronizing the time by management modules to BMC and LPAR
manager.(Recommended)
The following actions are possible in the [Date and Time] screen.
Any values modified on this screen will not be saved automatically in the
LPAR manager System and lost at the LPAR manager boot. Press [F9]: Save
Configuration on the [LPAR manager Menu] screen explicitly to save the
newly set value. For the LPAR manager system time,
Change the system equipment time or synchronize the LPAR manager system
time by NTP server for set of LPAR manager system time.
This [Date and Time] screen refreshes every second, so the cursor display
may not be stable. Moreover, the time may be displayed during updating.
Sample of NTP configuration screen is below.
Figure 7-32 NTP Server Configuration Screen
Sample of NTP Server configuration screen is below.
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
7-75